Dear Valued Customer,
U.S. Customs requires that we stress to you the importance of having security procedures in place at the point of stuffing along with inspection procedures in place when receiving your cargo. We would like to remind you that U.S. Customs requires that all loaded containers in transit to the U.S., including foreign cargo remaining on board (FROB), must have bolt seals that meet or exceed the ISO PAS 17712 standards for “high security” seals. In addition to the above, we suggest that you require the below 7 point container inspection process to be completed by your shippers overseas prior to loading:
1) Outside / Undercarriage: Support beams should be visible not covered by a steel plate.
2) Inside / Outside Doors: Secure locking mechanisms, different color material, loose bolts, plates and repairs. Solid plates should not cover standard container cavities.
3 & 4) Right / Left Sides: Unusual repairs to structural beams.
5) Front Wall Blocks & vents should be visible, use tool to tap on wall for hollow sound, measure interior to make sure it is proper length.
6) Ceiling / Roof: Measure to make sure proper height from floor, that blocks & vents are visible, repairs on inside should be visible on the outside, use tool to tap for hollow sound.
7) Floor (inside): Again should be certain height from Ceiling, should be flat.
The attached 17-point tractor & trailer inspection should be done on receipt of cargo at your facility. We urge you to provide your receiving staff and your shippers with written copies of these inspections.
We suggest that a seal inspection be completed both at time of loading and unloading:
• View seal & container locking hardware
• Verify seal number
• Tug on seal to make sure it is on right
• Twist & turn seal to make sure it does not unscrew
In the event a seal has been compromised, you should notify CBP immediately, or let us know, and we will notify them.
For more information on the C-TPAT program or to review the minimum security criteria and guidelines please click on the below link –
Contact us with any questions.
Lee Hardeman LeeH@LHCB.com Direct: 404-477-3452
Sandy Cato SandyC@LHCB.com Direct: 404-477-3454
If you do not wish to continue to receive our newsletter, please email me at leeh@lhcb.com and put “Unsubscribe” in the subject line.